Tradesperson 1 – Electrician
2025-08-07T19:17:29+00:00
Geita Gold Mining Ltd ( GGML )
https://cdn.greattanzaniajobs.com/jsjobsdata/data/employer/comp_1687/logo/Geita%20Gold%20Mining%20Ltd%20(GGML).png
https://www.geitamine.com/
FULL_TIME
Geita
Geita
00000
Tanzania
Mining
Science & Engineering
2025-08-14T17:00:00+00:00
Tanzania
8
PURPOSE OF THE ROLE:
Geita Gold mine is the gold mining and processing company, the company possesses gold processing machineries from crushing to final processed gold. The entire plant with its supporting auxiliaries is electrical driven of which it is automated and semi-automated in other external support equipment’s (Water pumping stations, CAF plants and underground compressors). The core aim of this role is to effectively execution of the electrical maintenance activities for the entire Process plant and external process plant services (Water pumping stations, CAF plants and underground compressors) to enable the Processing Department to optimize plant production and in a safe manner.
QUALIFICATIONS:
• Form IV or Form VI Secondary Education with VETA Qualification Grade I or Full Technician Certificate (FTC) in Electrical Engineering or Diploma in Electrical Engineering.
• Computer literate.
EXPERIENCE:
• A minimum of 5 years working experience as an Electrician in process plant in the process plant.
ADDITIONAL REQUIREMENTS:
• Knowledge of PLC.
• Possession of MV certificate of competence.
• Experience of MV Switchgear and maintenance thereof.
• Able to read/interpret instrument and electrical drawings.
MAIN OR KEY ACCOUNTABILITIES:
1. Safety Health and Environment
• Actively promoting discussion, awareness and improvement of safety and environmental aspects of work practices and striving for workplaces free of injury and illness, by doing the following
• Observe all Safety requirements relevant to the job in hand
• Report / Tag out any unsafe equipment immediately
• Utilize all necessary permits where required.
• Attending team toolbox meetings daily and give input
• Remove all scrap or left-over materials immediately
• Put /Store all equipment in its proper place.
• Compliance of Personal protective equipment, correct use of PPE
• Carry out work as required or directed and report unsafe equipment immediate.
• Discuss injuries/hazards reported and remedial action that needs taken
• Always maintain a SAFE work environment
• Electrical workplace (plant wide) to be always kept clean and tidy.
• Electrician must complete a TAKE 5 with every job being done.
• No job will be done without assessing the risks and safety aspects of the job (Take 5. JSA)
2. Compliance of Policy and Procedures
• You are required to comply with all GGM Policies and Procedures done in Inductions Training and instructions given.
3. Maintenance and availability of plant equipment
• Use your electrical experience and your knowledge of electrical equipment to support the Electrical Supervisors in achieving the required maintenance and availability goals by providing feedback and doing maintenance to the best of your ability.
• Complete all work assignments as given by Supervisors and report any defects on inspections being conducted.
• Ensure all Electrical equipment is always available in a safe and maintained state.
• Preparing, planning and execution of new installations in collaboration with the OEM.
• Testing and commissioning of new installations.
4. Role specific
• All planned Electrical work to be completed in set time as planned
• Maintaining all electrical distribution and switch gear equipment, MCC’s and electrical motors in the Process Plant specifically:
– All lighting and general power
– Plant distribution grid
– Electrical switch gear and transformer
– All Plant switch room (MCC’s)
– All MV and LV Variable Frequency Drivers (VFD’s) in the Plant
• Doing regular inspections of equipment, repairs, and equipment replacement in the Plant (especially during shutdowns) as well as electrical motors and others repairs in the workshop.
• Attend and fix electrical faults accordingly.
• Always use correct tools for the correct job
• Report any lost or damaged tool or electrical equipment.
• Toolbox and tools to be inspected and all defective tools to be reported.
• Utilize all necessary permits where required.
• Carry out work as required or directed and report unsafe equipment immediate.
• Controlling spends against budgets and forecasts.
Safety Health and Environment • Actively promoting discussion, awareness and improvement of safety and environmental aspects of work practices and striving for workplaces free of injury and illness, by doing the following • Observe all Safety requirements relevant to the job in hand • Report / Tag out any unsafe equipment immediately • Utilize all necessary permits where required. • Attending team toolbox meetings daily and give input • Remove all scrap or left-over materials immediately • Put /Store all equipment in its proper place. • Compliance of Personal protective equipment, correct use of PPE • Carry out work as required or directed and report unsafe equipment immediate. • Discuss injuries/hazards reported and remedial action that needs taken • Always maintain a SAFE work environment • Electrical workplace (plant wide) to be always kept clean and tidy. • Electrician must complete a TAKE 5 with every job being done. • No job will be done without assessing the risks and safety aspects of the job (Take 5. JSA) 2. Compliance of Policy and Procedures • You are required to comply with all GGM Policies and Procedures done in Inductions Training and instructions given. 3. Maintenance and availability of plant equipment • Use your electrical experience and your knowledge of electrical equipment to support the Electrical Supervisors in achieving the required maintenance and availability goals by providing feedback and doing maintenance to the best of your ability. • Complete all work assignments as given by Supervisors and report any defects on inspections being conducted. • Ensure all Electrical equipment is always available in a safe and maintained state. • Preparing, planning and execution of new installations in collaboration with the OEM. • Testing and commissioning of new installations. 4. Role specific • All planned Electrical work to be completed in set time as planned • Maintaining all electrical distribution and switch gear equipment, MCC’s and electrical motors in the Process Plant specifically: – All lighting and general power – Plant distribution grid – Electrical switch gear and transformer – All Plant switch room (MCC’s) – All MV and LV Variable Frequency Drivers (VFD’s) in the Plant • Doing regular inspections of equipment, repairs, and equipment replacement in the Plant (especially during shutdowns) as well as electrical motors and others repairs in the workshop. • Attend and fix electrical faults accordingly. • Always use correct tools for the correct job • Report any lost or damaged tool or electrical equipment. • Toolbox and tools to be inspected and all defective tools to be reported. • Utilize all necessary permits where required. • Carry out work as required or directed and report unsafe equipment immediate. • Controlling spends against budgets and forecasts.
Form IV or Form VI Secondary Education with VETA Qualification Grade I or Full Technician Certificate (FTC) in Electrical Engineering or Diploma in Electrical Engineering. • Computer literate. EXPERIENCE: • A minimum of 5 years working experience as an Electrician in process plant in the process plant. ADDITIONAL REQUIREMENTS: • Knowledge of PLC. • Possession of MV certificate of competence. • Experience of MV Switchgear and maintenance thereof. • Able to read/interpret instrument and electrical drawings.
JOB-6894fbc9870a7
Vacancy title:
Tradesperson 1 – Electrician
[Type: FULL_TIME, Industry: Mining, Category: Science & Engineering]
Jobs at:
Geita Gold Mining Ltd ( GGML )
Deadline of this Job:
Thursday, August 14 2025
Duty Station:
Geita | Geita | Tanzania
Summary
Date Posted: Thursday, August 7 2025, Base Salary: Not Disclosed
Similar Jobs in Tanzania
Learn more about Geita Gold Mining Ltd ( GGML )
Geita Gold Mining Ltd ( GGML ) jobs in Tanzania
JOB DETAILS:
PURPOSE OF THE ROLE:
Geita Gold mine is the gold mining and processing company, the company possesses gold processing machineries from crushing to final processed gold. The entire plant with its supporting auxiliaries is electrical driven of which it is automated and semi-automated in other external support equipment’s (Water pumping stations, CAF plants and underground compressors). The core aim of this role is to effectively execution of the electrical maintenance activities for the entire Process plant and external process plant services (Water pumping stations, CAF plants and underground compressors) to enable the Processing Department to optimize plant production and in a safe manner.
QUALIFICATIONS:
• Form IV or Form VI Secondary Education with VETA Qualification Grade I or Full Technician Certificate (FTC) in Electrical Engineering or Diploma in Electrical Engineering.
• Computer literate.
EXPERIENCE:
• A minimum of 5 years working experience as an Electrician in process plant in the process plant.
ADDITIONAL REQUIREMENTS:
• Knowledge of PLC.
• Possession of MV certificate of competence.
• Experience of MV Switchgear and maintenance thereof.
• Able to read/interpret instrument and electrical drawings.
MAIN OR KEY ACCOUNTABILITIES:
1. Safety Health and Environment
• Actively promoting discussion, awareness and improvement of safety and environmental aspects of work practices and striving for workplaces free of injury and illness, by doing the following
• Observe all Safety requirements relevant to the job in hand
• Report / Tag out any unsafe equipment immediately
• Utilize all necessary permits where required.
• Attending team toolbox meetings daily and give input
• Remove all scrap or left-over materials immediately
• Put /Store all equipment in its proper place.
• Compliance of Personal protective equipment, correct use of PPE
• Carry out work as required or directed and report unsafe equipment immediate.
• Discuss injuries/hazards reported and remedial action that needs taken
• Always maintain a SAFE work environment
• Electrical workplace (plant wide) to be always kept clean and tidy.
• Electrician must complete a TAKE 5 with every job being done.
• No job will be done without assessing the risks and safety aspects of the job (Take 5. JSA)
2. Compliance of Policy and Procedures
• You are required to comply with all GGM Policies and Procedures done in Inductions Training and instructions given.
3. Maintenance and availability of plant equipment
• Use your electrical experience and your knowledge of electrical equipment to support the Electrical Supervisors in achieving the required maintenance and availability goals by providing feedback and doing maintenance to the best of your ability.
• Complete all work assignments as given by Supervisors and report any defects on inspections being conducted.
• Ensure all Electrical equipment is always available in a safe and maintained state.
• Preparing, planning and execution of new installations in collaboration with the OEM.
• Testing and commissioning of new installations.
4. Role specific
• All planned Electrical work to be completed in set time as planned
• Maintaining all electrical distribution and switch gear equipment, MCC’s and electrical motors in the Process Plant specifically:
– All lighting and general power
– Plant distribution grid
– Electrical switch gear and transformer
– All Plant switch room (MCC’s)
– All MV and LV Variable Frequency Drivers (VFD’s) in the Plant
• Doing regular inspections of equipment, repairs, and equipment replacement in the Plant (especially during shutdowns) as well as electrical motors and others repairs in the workshop.
• Attend and fix electrical faults accordingly.
• Always use correct tools for the correct job
• Report any lost or damaged tool or electrical equipment.
• Toolbox and tools to be inspected and all defective tools to be reported.
• Utilize all necessary permits where required.
• Carry out work as required or directed and report unsafe equipment immediate.
• Controlling spends against budgets and forecasts.
Work Hours: 8
Experience in Months: 60
Level of Education: associate degree
Job application procedure
Interested and qualified? Click here to apply
All Jobs | QUICK ALERT SUBSCRIPTION
.png){kind=logo}
