Pipeline Engineer
2025-09-09T03:06:35+00:00
SeaOwl Group
https://cdn.greattanzaniajobs.com/jsjobsdata/data/employer/comp_4172/logo/SeaOwl%20Group.png
https://seaowlgroup.com/
FULL_TIME
Tanzania
Tanzania
00000
Tanzania
Engineering Services
Science & Engineering
2025-09-19T17:00:00+00:00
Tanzania
8
JOB DIMENSIONS/ GENERAL JOB DESCRIPTION:
* Pipeline engineer will be part of EACOP inspection entity. He/she will manage pipeline inspection activity directly for PS4/PS5 and MST perimeters, for PS1 perimeter, he will provide support to the pipeline and inspection engineer. He/she will follow guidance and inspection philosophy from Inspection Leader. He/she will be in charge to define the pipeline corrosion guidance documents. Pipeline engineer will be the main interface and focal point for pipeline integrity management and corrosion and chemical treatment follow up in Tanzanian perimeters. Corrosion coupons and intelligent pigging operation will be closely prepared and assisted by pipeline and inspection engineer. He/she will ensure inspection scope and campaign are completed.
* EACOP PS4,5 and MST perimeters main equipment under pipeline engineer responsibility are:
- Pipeline.
- Corrosion coupons.
- EPRS (pipeline repair).
DUTIES & RESPONSIBILITIES:
- Implements the Inspection Plans (written scheme of inspection) for the following equipment: PSD, pipelines, and pipeline related structure as HDD.
- Ensures that equipment registers, Inspection Plans scheduling, Inspection Reporting, Remedial actions are managed with the dedicated CMIMS (Computerized Maintenance & Inspection Management System) and RBI-P.
- Ensures that Inspections and Non-Destructive Testing are executed in compliance with the relevant Safety Rules, Inspection Plans, Technical Procedures and Standards.
- Ensures coordination of inspection activities on Site and supervision of inspection Contractors.
- Assists the Third-party representatives responsible for statutory inspections (Third Party certification, Authorities).
- Prepares / Reviews the Inspection Reports, including analysis of inspection f indings, fit for service assessment, recommendation, or remedial actions.
- Prepares/reviews pipeline inspection and corrosion guidance document and procedure.
- Prepares/reviews SMC as intelligent pigging and corrosion coupons analysis and operations.
- Proposes / reviews the recommendations for corrective actions (material selection, design of equipment, coating, cathodic protection, operating conditions, corrosion inhibition…).
- Make sure that recommendations for remedial actions are issued in the CMIMS system and ensure their follow up.
- Ensures that repair / modifications / procurement of equipment comply with the relevant regulation, company rules, technical codes, and norms.
- Reviews management of change request when required.
- Participates in technical audits of contracted companies regarding Non Destructive Testing, Welding, Piping / Pressure Vessel fabrication, Coating.
- Updates data required for Risk base inspection tools.
- Be the focal point for pipeline inspection and corrosion exchange for Tanzania pipeline section.
HEALTH, SAFETY & ENVIRONMENTAL RESPONSIBILITIES:
EACOP is committed to ensuring that the health, safety and welfare of workers, communities, and the environment are well addressed and managed. Therefore, the employee is mandated to:
- Fully complies with Company H3SE (Health, Safety, Social, Security & Environment) policies and Life Saving Rules.
- Actively participates in HSEQ and promotes this culture to co-workers.
- Remain vigilant and maintain continuous awareness of potential unsafe conditions.
- Communicates to management any HSE related concerns and ways to improve them.
- Maintains a workplace & workspace that is safe, clean, and always neat – practice good housekeeping.
QUALIFICATIONS / EXPERIENCE REQUIRED:
Academic Qualifications:
- Bachelor level or similar.
- Materials or Chemistry engineering with emphasis on materials, metallurgy, and chemical reactions such as corrosion.
- Good knowledge of international Codes, Standards and Regulation related to the inspection discipline (ASME, API, NACE…).
- Good knowledge of materials, metallurgy, welding, corrosion, failure modes, Non-Destructive Testing, and inspection techniques.
- Good knowledge of computer tools.
- Good knowledge in Fitness for Service assessment methods (API RP 579, ASME, DNV…).
- Proficiency in oral and written English.
- ERB Registration as a Professional Engineer.
Experience Required:
- Experience in corrosion analysis.
- Experience in chemistry.
Implements the Inspection Plans (written scheme of inspection) for the following equipment: PSD, pipelines, and pipeline related structure as HDD. Ensures that equipment registers, Inspection Plans scheduling, Inspection Reporting, Remedial actions are managed with the dedicated CMIMS (Computerized Maintenance & Inspection Management System) and RBI-P. Ensures that Inspections and Non-Destructive Testing are executed in compliance with the relevant Safety Rules, Inspection Plans, Technical Procedures and Standards. Ensures coordination of inspection activities on Site and supervision of inspection Contractors. Assists the Third-party representatives responsible for statutory inspections (Third Party certification, Authorities). Prepares / Reviews the Inspection Reports, including analysis of inspection f indings, fit for service assessment, recommendation, or remedial actions. Prepares/reviews pipeline inspection and corrosion guidance document and procedure. Prepares/reviews SMC as intelligent pigging and corrosion coupons analysis and operations. Proposes / reviews the recommendations for corrective actions (material selection, design of equipment, coating, cathodic protection, operating conditions, corrosion inhibition…). Make sure that recommendations for remedial actions are issued in the CMIMS system and ensure their follow up. Ensures that repair / modifications / procurement of equipment comply with the relevant regulation, company rules, technical codes, and norms. Reviews management of change request when required. Participates in technical audits of contracted companies regarding Non Destructive Testing, Welding, Piping / Pressure Vessel fabrication, Coating. Updates data required for Risk base inspection tools. Be the focal point for pipeline inspection and corrosion exchange for Tanzania pipeline section. HEALTH, SAFETY & ENVIRONMENTAL RESPONSIBILITIES: EACOP is committed to ensuring that the health, safety and welfare of workers, communities, and the environment are well addressed and managed. Therefore, the employee is mandated to: Fully complies with Company H3SE (Health, Safety, Social, Security & Environment) policies and Life Saving Rules. Actively participates in HSEQ and promotes this culture to co-workers. Remain vigilant and maintain continuous awareness of potential unsafe conditions. Communicates to management any HSE related concerns and ways to improve them. Maintains a workplace & workspace that is safe, clean, and always neat – practice good housekeeping.
Bachelor level or similar. Materials or Chemistry engineering with emphasis on materials, metallurgy, and chemical reactions such as corrosion. Good knowledge of international Codes, Standards and Regulation related to the inspection discipline (ASME, API, NACE…). Good knowledge of materials, metallurgy, welding, corrosion, failure modes, Non-Destructive Testing, and inspection techniques. Good knowledge of computer tools. Good knowledge in Fitness for Service assessment methods (API RP 579, ASME, DNV…). Proficiency in oral and written English. ERB Registration as a Professional Engineer.
JOB-68bf99bb07d4d
Vacancy title:
Pipeline Engineer
[Type: FULL_TIME, Industry: Engineering Services, Category: Science & Engineering]
Jobs at:
SeaOwl Group
Deadline of this Job:
Friday, September 19 2025
Duty Station:
Tanzania | Tanzania | Tanzania
Summary
Date Posted: Tuesday, September 9 2025, Base Salary: Not Disclosed
Similar Jobs in Tanzania
Learn more about SeaOwl Group
SeaOwl Group jobs in Tanzania
JOB DETAILS:
JOB DIMENSIONS/ GENERAL JOB DESCRIPTION:
* Pipeline engineer will be part of EACOP inspection entity. He/she will manage pipeline inspection activity directly for PS4/PS5 and MST perimeters, for PS1 perimeter, he will provide support to the pipeline and inspection engineer. He/she will follow guidance and inspection philosophy from Inspection Leader. He/she will be in charge to define the pipeline corrosion guidance documents. Pipeline engineer will be the main interface and focal point for pipeline integrity management and corrosion and chemical treatment follow up in Tanzanian perimeters. Corrosion coupons and intelligent pigging operation will be closely prepared and assisted by pipeline and inspection engineer. He/she will ensure inspection scope and campaign are completed.
* EACOP PS4,5 and MST perimeters main equipment under pipeline engineer responsibility are:
- Pipeline.
- Corrosion coupons.
- EPRS (pipeline repair).
DUTIES & RESPONSIBILITIES:
- Implements the Inspection Plans (written scheme of inspection) for the following equipment: PSD, pipelines, and pipeline related structure as HDD.
- Ensures that equipment registers, Inspection Plans scheduling, Inspection Reporting, Remedial actions are managed with the dedicated CMIMS (Computerized Maintenance & Inspection Management System) and RBI-P.
- Ensures that Inspections and Non-Destructive Testing are executed in compliance with the relevant Safety Rules, Inspection Plans, Technical Procedures and Standards.
- Ensures coordination of inspection activities on Site and supervision of inspection Contractors.
- Assists the Third-party representatives responsible for statutory inspections (Third Party certification, Authorities).
- Prepares / Reviews the Inspection Reports, including analysis of inspection f indings, fit for service assessment, recommendation, or remedial actions.
- Prepares/reviews pipeline inspection and corrosion guidance document and procedure.
- Prepares/reviews SMC as intelligent pigging and corrosion coupons analysis and operations.
- Proposes / reviews the recommendations for corrective actions (material selection, design of equipment, coating, cathodic protection, operating conditions, corrosion inhibition…).
- Make sure that recommendations for remedial actions are issued in the CMIMS system and ensure their follow up.
- Ensures that repair / modifications / procurement of equipment comply with the relevant regulation, company rules, technical codes, and norms.
- Reviews management of change request when required.
- Participates in technical audits of contracted companies regarding Non Destructive Testing, Welding, Piping / Pressure Vessel fabrication, Coating.
- Updates data required for Risk base inspection tools.
- Be the focal point for pipeline inspection and corrosion exchange for Tanzania pipeline section.
HEALTH, SAFETY & ENVIRONMENTAL RESPONSIBILITIES:
EACOP is committed to ensuring that the health, safety and welfare of workers, communities, and the environment are well addressed and managed. Therefore, the employee is mandated to:
- Fully complies with Company H3SE (Health, Safety, Social, Security & Environment) policies and Life Saving Rules.
- Actively participates in HSEQ and promotes this culture to co-workers.
- Remain vigilant and maintain continuous awareness of potential unsafe conditions.
- Communicates to management any HSE related concerns and ways to improve them.
- Maintains a workplace & workspace that is safe, clean, and always neat – practice good housekeeping.
QUALIFICATIONS / EXPERIENCE REQUIRED:
Academic Qualifications:
- Bachelor level or similar.
- Materials or Chemistry engineering with emphasis on materials, metallurgy, and chemical reactions such as corrosion.
- Good knowledge of international Codes, Standards and Regulation related to the inspection discipline (ASME, API, NACE…).
- Good knowledge of materials, metallurgy, welding, corrosion, failure modes, Non-Destructive Testing, and inspection techniques.
- Good knowledge of computer tools.
- Good knowledge in Fitness for Service assessment methods (API RP 579, ASME, DNV…).
- Proficiency in oral and written English.
- ERB Registration as a Professional Engineer.
Experience Required:
- Experience in corrosion analysis.
- Experience in chemistry.
Work Hours: 8
Experience in Months: 60
Level of Education: bachelor degree
Job application procedure
Interested and qualified? Click here to apply
All Jobs | QUICK ALERT SUBSCRIPTION
