Tradesperson 1 – UG Tyres
2025-09-03T11:33:22+00:00
Geita Gold Mining Ltd ( GGML )
https://cdn.greattanzaniajobs.com/jsjobsdata/data/employer/comp_1687/logo/Geita%20Gold%20Mining%20Ltd%20(GGML).png
https://www.geitamine.com/
FULL_TIME
Geita
Geita
00000
Tanzania
Mining
Energy & Mining
2025-09-10T17:00:00+00:00
Tanzania
8
PURPOSE OF THE ROLE:
To ensure that all tyre machines are attended in a daily basis. Also to ensure tyre management and work requirement of Engineering – Tyre Section at GGML is carried out efficiently and safely and to identify upcoming work for planning with other departments and contractors on site.
QUALIFICATIONS:
- Certificate of Secondary Education Examination with OTR Tyre management level two or above (certified with approved Tyre Management training institute).
- The incumbent must have a valid Tanzania driving license.
EXPERIENCE:
- A minimum of 3 years’ experience in OTR tyre management – Mining industry.
ADDITIONAL REQUIREMENTS:
- Tyre fitting skills – correct and safe use of tyre fitting tools and equipment.
- Repair and re-grooving skills – correct and safe use of repair and re-grooving tooling and equipment.
- Ability to understand tyre sizes and applications (advising client and ability to discuss with tyre manufacturer reps).
- Ability to understand tyre failure causes and analysis.
- Tyre fitting skills – correct and safe use of tyre fitting tools and equipment.
- Repair and re-grooving skills – correct and safe use of repair and re-grooving tooling and equipment.
- Understanding safe methods of work procedures and safety performance measures.
MAIN OR KEY ACCOUNTABILITIES:
- Participate in daily and weekly safety meetings on site, raise and address issues.
- Ensure safe working procedures are being always followed.
- Ensure site conditions permit tyre fitting work to be carried out safely, highlight areas to be addressed.
- Self-driving on attending equipment break downs at the field & provide feedback to supervisor immediately.
- Perform equipment checks and calibrations according to GGML Standard Work.
- Fit and remove wheels from any type of vehicle according to GGML Standard Work Procedures.
- Mount and strip any type of tyre and rim assembly according to GGML Standard Work Procedures.
- Perform repairs to tyres and tubes according to GGML Standard Work Procedures.
- Operate forklifts and all other types of tyre handlers according to GGML Standard Work Procedures.
- Clean, paint and crack test rim components according to GGM Standard Work Procedures
- Perform Inspections and determine the suitability of wheel components to remain in service.
- Maintain tyre operating pressures in accordance with GGML standard.
- Ensure all tyre data collected is as accurate as possible and is applicable in GGML.
- Ensure all documentation on site is filed and stored promptly and is auditable.
- Maintain sufficient stock on site of rims, rim components, rim soap, sealant, tyres etc., and regularly audit to maintain correct levels.
- Perform tire fitter duties if required, or any other duties allocated.
Participate in daily and weekly safety meetings on site, raise and address issues. Ensure safe working procedures are being always followed. Ensure site conditions permit tyre fitting work to be carried out safely, highlight areas to be addressed. Self-driving on attending equipment break downs at the field & provide feedback to supervisor immediately. Perform equipment checks and calibrations according to GGML Standard Work. Fit and remove wheels from any type of vehicle according to GGML Standard Work Procedures. Mount and strip any type of tyre and rim assembly according to GGML Standard Work Procedures. Perform repairs to tyres and tubes according to GGML Standard Work Procedures. Operate forklifts and all other types of tyre handlers according to GGML Standard Work Procedures. Clean, paint and crack test rim components according to GGM Standard Work Procedures Perform Inspections and determine the suitability of wheel components to remain in service. Maintain tyre operating pressures in accordance with GGML standard. Ensure all tyre data collected is as accurate as possible and is applicable in GGML. Ensure all documentation on site is filed and stored promptly and is auditable. Maintain sufficient stock on site of rims, rim components, rim soap, sealant, tyres etc., and regularly audit to maintain correct levels. Perform tire fitter duties if required, or any other duties allocated.
Certificate of Secondary Education Examination with OTR Tyre management level two or above (certified with approved Tyre Management training institute). The incumbent must have a valid Tanzania driving license. EXPERIENCE: A minimum of 3 years’ experience in OTR tyre management – Mining industry.
JOB-68b82782125fe
Vacancy title:
Tradesperson 1 – UG Tyres
[Type: FULL_TIME, Industry: Mining, Category: Energy & Mining]
Jobs at:
Geita Gold Mining Ltd ( GGML )
Deadline of this Job:
Wednesday, September 10 2025
Duty Station:
Geita | Geita | Tanzania
Summary
Date Posted: Wednesday, September 3 2025, Base Salary: Not Disclosed
Similar Jobs in Tanzania
Learn more about Geita Gold Mining Ltd ( GGML )
Geita Gold Mining Ltd ( GGML ) jobs in Tanzania
JOB DETAILS:
PURPOSE OF THE ROLE:
To ensure that all tyre machines are attended in a daily basis. Also to ensure tyre management and work requirement of Engineering – Tyre Section at GGML is carried out efficiently and safely and to identify upcoming work for planning with other departments and contractors on site.
QUALIFICATIONS:
- Certificate of Secondary Education Examination with OTR Tyre management level two or above (certified with approved Tyre Management training institute).
- The incumbent must have a valid Tanzania driving license.
EXPERIENCE:
- A minimum of 3 years’ experience in OTR tyre management – Mining industry.
ADDITIONAL REQUIREMENTS:
- Tyre fitting skills – correct and safe use of tyre fitting tools and equipment.
- Repair and re-grooving skills – correct and safe use of repair and re-grooving tooling and equipment.
- Ability to understand tyre sizes and applications (advising client and ability to discuss with tyre manufacturer reps).
- Ability to understand tyre failure causes and analysis.
- Tyre fitting skills – correct and safe use of tyre fitting tools and equipment.
- Repair and re-grooving skills – correct and safe use of repair and re-grooving tooling and equipment.
- Understanding safe methods of work procedures and safety performance measures.
MAIN OR KEY ACCOUNTABILITIES:
- Participate in daily and weekly safety meetings on site, raise and address issues.
- Ensure safe working procedures are being always followed.
- Ensure site conditions permit tyre fitting work to be carried out safely, highlight areas to be addressed.
- Self-driving on attending equipment break downs at the field & provide feedback to supervisor immediately.
- Perform equipment checks and calibrations according to GGML Standard Work.
- Fit and remove wheels from any type of vehicle according to GGML Standard Work Procedures.
- Mount and strip any type of tyre and rim assembly according to GGML Standard Work Procedures.
- Perform repairs to tyres and tubes according to GGML Standard Work Procedures.
- Operate forklifts and all other types of tyre handlers according to GGML Standard Work Procedures.
- Clean, paint and crack test rim components according to GGM Standard Work Procedures
- Perform Inspections and determine the suitability of wheel components to remain in service.
- Maintain tyre operating pressures in accordance with GGML standard.
- Ensure all tyre data collected is as accurate as possible and is applicable in GGML.
- Ensure all documentation on site is filed and stored promptly and is auditable.
- Maintain sufficient stock on site of rims, rim components, rim soap, sealant, tyres etc., and regularly audit to maintain correct levels.
- Perform tire fitter duties if required, or any other duties allocated.
Work Hours: 8
Experience in Months: 36
Level of Education: professional certificate
Job application procedure
Interested and qualified? Click here to apply
All Jobs | QUICK ALERT SUBSCRIPTION
.png){kind=logo}
